Home > Sheet and Plates > Stainless Steel 410S Sheet and Plates
Lecong Stainless, a prominent manufacturer and supplier based in Da Nang, Vietnam, specializes in high-quality Stainless Steel 410S Sheets and Plates. These products are celebrated for their outstanding oxidation resistance, toughness, and weldability. Stainless Steel 410S is a low-carbon martensitic stainless steel that minimizes hardening during heat treatment, which enhances its ductility and formability compared to standard SS 410. Our SS 410S Sheets and Plates are crafted with precise dimensions, a smooth finish, and the durability needed to withstand high temperatures and corrosive environments. They find extensive use in the automotive, petrochemical, thermal processing, and construction industries due to their reliable performance and long service life.
Stainless Steel 410S Sheets and Plates consist of 11.5–13.5% chromium with a low carbon content (≤0.08%) to avoid hardening. They also contain small amounts of manganese, silicon, phosphorus, and sulfur for balance. This unique composition ensures good resistance to oxidation, scaling, and mild corrosion. In terms of mechanical properties, SS 410S boasts a tensile strength of 380–550 MPa and a yield strength of around 275 MPa, along with excellent toughness and ductility. The alloy is known for its good weldability and formability, resisting embrittlement at high temperatures, making it a versatile choice for thermal processing and various industrial applications.
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
| Element | SS 410S |
| C | 0.08 max |
| Mn | 1 max |
| Si | 1 max |
| P | 0.040 max |
| S | 0.030 max |
| Cr | 11.5 – 13.5 |
| Fe | 85 |
| Element | SS 410S |
| Density | 7.8 g/cm3 |
| Tensile Strength | psi – 64,400, MPa – 444 |
| Yield Strength (0.2%Offset) | psi – 42,000, MPa – 290 |
| Elongation | 33 % |
| Hardness | Rockwell B (HR B)- 75 / Brinell (HB)- 65 |
Contact us to get a quick quote for your requirement.
Stainless Steel 410S hot rolled sheets possess excellent corrosion resistance with high strength and toughness. The sheets come in a wide range of thicknesses, starting from 1.5 mm up to 20 mm with widths up to 2000 mm. These are suitable for high-impact resistant applications.
Stainless Steel 410S Cold Rolled Plates have corrosion resistance along with a smooth, bright surface finish. Usually made available in width up to 1500mm and in different thickness ranges such as 0.5-6 mm these plates are specially suited for use in precision engineering and for critical applications where closer tolerances apply.
Stainless Steel 410S Chequered Sheets have a raised pattern, which gives excellent corrosion and slip resistance. These sheets are available in various thicknesses from 1.2 mm to 6 mm and up to 2000 mm x 1000 mm dimensions, which make them suitable for flooring and decorative applications.
Stainless Steel 410S Perforated Plates combine protection against corrosion with increased ventilation and aesthetics. The perforated plates are available in a number of hole sizes and patterns, available in thicknesses ranging from 1 mm up to 4 mm and available in dimensions up to 2500 mm × 1200 mm for filters and screens.
The Shim Sheets of Stainless Steel 410S are available with corrosion resistance and precise control over thickness. These sheets are available in 0.1 mm thickness up to 1000 mm x 1000 mm, cut to size for fine-tuning mechanical fits.
Stainless Steel 410S polished plates offer outstanding corrosion resistance and have a highly reflective finish. The plates are usually available in sizes up to 2000 mm x 1000 mm with thickness between 1mm and 6mm. Stainless Steel 410S Polished Plates are used in aesthetic applications as well as in decorative purposes.
Lecong Stainless guarantees a high customer experience by completing all the necessary documentation of high-quality Stainless Steel 410S Sheets and Plates. We will provide our customer with commercial invoices, packing list, fumigation certificate, heat treatment chart, quality assurance plan, and lab test reports certified by NABL-approved labs to prove authenticity and superior quality in our products that can give complete trust and satisfaction to our respected customers. Additionally, our Stainless Steel 410S Sheets and Plates are supplied with test certificates such as MTC as per EN 10204/3.1b, PMI Test Certificate, a 100% radiography test report, and Third Party Inspection Certificate. These certificates reflect our customer-focused approach and our very strong commitment to product excellence.
Stainless Steel 410S Sheets and Plates are a go-to choice in industries that require heat resistance, toughness, and protection against oxidation. In the automotive sector, you’ll find them in exhaust systems, mufflers, and catalytic converters. Power generation and petrochemical facilities rely on these materials for heat exchangers, furnaces, and thermal processing equipment. Construction projects also make use of SS 410S Sheets and Plates for structural applications, roofing, and cladding that need to withstand heat and mild corrosion. Additionally, they play a role in coal handling equipment, annealing boxes, and ductwork. Thanks to their weldability, formability, and durability, SS 410S Sheets and Plates offer a cost-effective solution for a wide range of industrial applications.
©2024 Lecong Stainless All Rights Reserved.
